Common Errors Made When Purchasing Forklifts

Forklifts Scotland are quite heavy and critical machines for any warehouse industry and mainly used for lifting and carrying heavy weights for quite a few distance. This complex and application specific unit is quite an expensive purchase. Still many people tend to make mistake in not purchasing the right one. Below mentioned are some common mistakes which one must avoid to make forklifts a profitable investment –

• Selecting the wrong model - With such a huge variety and models available in the market, people often forget to look into their own business requirements and fall prey to the glib talk of the salesman often ending up with a far more expensive model that may not meet their business requirement.

• Thinking only of present and not future - Sometimes, the buyer look into only the present specifications that he would need and not what he would require in not so distant future as his business will expand. The makes the unit worthless in a much shorter duration, creating the need to upgrade it very soon.

• Not using advice of a certified technician - It is always advisable to seek the consultation of a trained and expert technician to studies your business environment well and provides you the best specifications suitable for your needs. Again tagging him along while selecting the right unit, he can give a thorough inspection both internally and externally to the unit with a test drive which can ensure that you are not buying a piece of lemon.

• Not comparing models of various brands - Often buyers tend to settle on the first thing that meets their specifications. They fail to check out similar specifications from other brands and compare them all both in terms of their pros and cons and their cost. This should be done to get the most advantageous unit.

• Not getting genuine parts - Often, falling to the lure of cutting cost, the buyers buy generic or “will-fit” parts and not the genuine parts which can cost them dear in the future.

A little homework and smart thinking can help you make an intelligent choice and save you quite a bit of money.

Read More

The Benefits of Moffett Truck Mounted Forklifts

The Moffett truck mounted forklifts are getting a very popular choice for a flexible portable delivery system under the toughest of the conditions. It allows you to deliver when and where you want in spite of the ground conditions being quite tough. It has numerous benefits and advantages.

These units are ideal for use with most trucks and trailers since they transport using the absolutely unique Moffett shock absorbing mounting kit. They are also available in large variety of models to suit different requirements. For instance, the lightweight varieties are ideal for maximizing truck loads while the shorter ones are terrific to meet the stringent trailer length regulations. Those looking for exemplary maneuverability on residential and industrial indoor terrains, the hydrostatic all-wheel drive are an excellent choice. Many other such specifications are available.

Revolutionizing the trucking industry, these units provide the truck drivers, the unique ability to self unload cargo and save them both time and money. It also saves plenty of labor costs. All that needs to be done by the truck driver is to disengage the forklift from the truck and then reconnect it back after the cargo has been unloaded. The driver is free to leave on record time.

These units can definitely enhance the health and safety environment of the work arena. Sites with no forklift facility often have to resort to unloading by hand. The lifting is also done manually which can cause strain and injury to the back of both staff and customers. This hits on productivity due to sick leave and can even invite HSE prosecution. With the help of these units, the issue gets easily resolved.

Some business areas do not have room for lorry of any size. Using this unit, one can park them beside the property and then take the cargo individually to the business area. This is especially beneficial for pallet transportation. A hiab or crane lorry or even a pallet truck and tail lift may not be ideal for this due to the uneven ground, loose surfaces or any other challenges. These are just some of the benefits of choosing the truck mounted forklifts.

Read More

Tips on Selecting the Right Forklift

Some very important considerations are required before selecting the perfect forklift Edinburgh for your business which is efficiently able to meet all its requirements but without entailing any extra and unnecessary expenditure from your side. The following tips should guide you in comparing and selecting the right one.

Size and weight of the typical loads 
 

The weight and the size of the loads that needs to be transported in present and near future will help you gauge the capacity of the forklift. It should not be too high or too low that it does not carry the loads safely on all your sites. Another point to look into is the height the loads need to be lifted since the forklift capacity has an important bearing on it. The load capacity also affects the type and fuel required.

Indoor or Outdoor use or both
 

The type of forklift and its configuration required will depend hugely on the surface areas of the worksite. For instance, on a perfectly flat dry surfaces and indoor use, the best forklifts are the high reach ones. In contrast, the counter balance forklifts exhibit much more flexibility and can be easily used on both flat and unruly terrain both indoors and outdoors.

The surfaces also bear an influence on the type of tires used. Outdoor forklifts require tires that normally have a tread pattern type for better grips even in wet weather. Alternately, the indoor ones have non marking type tires so as not to leave any black marks or any rubber on the polished surface.

The fuel is also decided by the use. If used indoors, it’s best to avoid petrol and diesel engines since they produce poisonous exhaust fumes which can be dangerous in the internal environment. The battery electric and the LPG are the most ideal ones for indoors. For indoor forklifts, another major consideration is the maneuverability. The width of the narrowest aisles and the amount of space allowed for maneuvering will decide its size.

There are many other considerations which impact the selection of the right forklift that is both useful and economical for you.

Read More

Tips on Buying Used Forklifts Glassgow Wisely

A forklift is perhaps one of the most important equipment at any construction site to move bundles of wood, Unloading cargo from containers retrieving pallets from warehouse and a horde of numerous other activities. While it’s always recommended to buy new equipment, sometimes due to various reasons, one is forced to buy used forklifts Glassgow. However the following tips should always be borne in mind:-

One should always accompany a specialist and qualified person while going for inspecting the forklift since they may appear well outside but have some serious defects inside. Trained personnel would thoroughly inspect all inside parts and mechanism in detail and easily detect any foul play. This helps safeguard one’s investment into the forklift. One needs to check into the maintenance details of the truck to evaluate its condition. Both maintenance records and a physical mechanical inspection would give you a fair idea.

The physical inspection should be continued from the forks to the mast rails for any cracks or welds that may affect the mast structural integrity. Sign of excess wear, compressed oval roller instead of a round one, lift chains, hoses, tilt cylinder, hydraulic brakes etc should be microscopically inspected for nay wear and tear, damage or leaks and missing or insecure bolts to get a fair idea of how old the unit is.

Similarly the frame and the cowling of the unit should be given a thorough inspection. The canopy’s main supports should also be checked for any bend or damage as they can affect the unit’s ability to protect the driver in scenario of a dropped load or rollover. The integrity of side screens and, general cab and a detailed examination of its engine compartment exhaust guard and counter weights should be done.

Finally there is nothing like a test drive on real roads through a tight figure-eight pattern should be executed. Both forward and reverse gears should be checked. The response time and all other details must be checked real time by the expert. Once the expert has given the green signal, only then should you go for the purchase.

Read More